Feeding square bales, round bales, pit silage or beet?
No matter what you've got to feed, the Giltrap MultiPlus Feeder will get the job done efficiently with minimal waste.
Key Features
- Can feed out both sides & into troughs
- Rate control on the cross floor chain with elevator load sensing valve for an evenly controlled feed rate
- High sides are standard for stacking two layers of square bales
- Hydraulic tilting elevator on right hand side with concertina anti-spillage plate
- Chain and slat transfer floor allows the load to be reversed
- LED lights
- Heavy duty tandem axles with remote greasing points
Stainless steel chain tensioning adjusters are easy to access and won’t rust
Quick release gate on the rear eliminates damage if the load is reversed by accident. The gate swings fully open to load bales through the rear
Rope rails run the full length of the body to tie bale twine on to. The twine strips off the bale as the load moves forward
Zinc plated steel concertina plates reduce spillage from the folding elevator
Combined Hardox450® and Strenx700® tub body for unmatched structural strength and toughness
Both the main floor and cross conveyor are driven by high torque rated hydraulically driven reduction gearboxes
An optional rotor kit can be fitted in place of the cross floor gate. This shreds bales for a more even feed row
MultiPlus 13 Specifications
- 4 x 1800 dia.
- 4 up to 7' long (single layer)
- 13.5
- 8700
- 4165
- 5760
- 7500
- 2100
- 2890
- 70 6 stud unbraked
- 400/60-15.5
- Oscillating beam
- 1200
- 2300
- 4 chains/slat moving floor
MultiPlus feeding out silage and fodder beet
